OPERATION

TRANSPORTING MOWER

Transporting under the units own power:

When transporting between job sites or between cutting passes, the following

procedure should be followed: Shut off the power to the cutting head(s) and allow all motion to come to a complete stop. Raise the draft beam to it’s highest position. Raise the side mower until the deck stops against the draft beam. Raise the rear mower with the 3-point hitch control lever. The unit is now in position for self transportation.

Transporting unit by flatbed trailer:

Most tractors with a side mounted mower head attached will be over legal transporting width (102” wide). For this reason, one of the following procedures must be followed.

1:Transporting with side mower attached: Use a loading dock or ramp to load tractor onto the trailer. Center the tractor with the mowers attached between the sides of the trailer. Make sure the draft beam and head are fully raised and secured. Lower the rear mower onto the trailer. Secure the tractor and rear mower to the trailer with chains. Obtain proper over-width permits and mark the vehicle and mower as over-width as required be law. Check the tractor operators manual for any tractor requirements to transport by flatbed trailer.

2:Transporting with side mower removed: Park the tractor and turn the engine off. Remove the key to avoid accidental starting. Close ball valves on the hydraulic reservoir. To avoid contaminating the hydraulic system, make sure all fittings on the side mower motor and solenoid control valve are clean. Disconnect the motor pressure hose at the solenoid valve and the motor return hose at the motor. See diagram below.

Operation Section 3-7

Page 54 Page 56
Page 55
Image 55
Tiger Products Co., Ltd JD 72-7520 manual Operation Transporting Mower, Transporting under the units own power
Page 54 Page 56

JD 72-7520 specifications

Tiger Products Co., Ltd is renowned for its innovative machinery solutions, and one of its standout offerings is the JD 72-7520 model. This advanced machine is designed to meet the diverse needs of the woodworking and manufacturing industries, providing a range of features that enhance operational efficiency and precision.

The JD 72-7520 is characterized by its robust construction, ensuring durability and longevity even in demanding work environments. Built with high-quality materials, this machine can withstand the rigors of continuous use, making it a reliable choice for businesses looking to invest in long-term equipment.

One of the main features of the JD 72-7520 is its powerful motor. This engine drives the machine's operations with superior strength, allowing it to perform heavy-duty tasks effortlessly. The motor's efficiency not only contributes to faster processing times but also results in lower energy consumption, making it an eco-friendly choice for manufacturers.

Technologically, the JD 72-7520 incorporates advanced digital controls that enhance user experience and operational precision. These controls facilitate easy adjustments and settings, enabling operators to fine-tune parameters for different types of materials and desired outcomes. With this level of control, manufacturers can achieve consistent results and maintain high-quality production standards.

Another noteworthy characteristic of the JD 72-7520 is its versatility. Designed to handle various woodworking tasks, the machine can be used for cutting, shaping, and finishing a wide range of materials. This adaptability makes it suitable for different applications, from furniture making to cabinetry and beyond, allowing businesses to expand their service offerings without investing in multiple equipment types.

Moreover, the JD 72-7520 places a strong emphasis on safety features. Enhanced user protection mechanisms are integrated, minimizing the risk of accidents during operation. These include safety guards, emergency stops, and sensors that prevent mishaps, making it a safe working environment for operators.

In summary, the Tiger Products Co., Ltd JD 72-7520 is an extraordinary machine that combines power, efficiency, and safety. Its durable construction, advanced digital controls, versatility, and emphasis on user safety make it a valuable asset for any woodworking or manufacturing business looking to enhance productivity and quality. Whether used in small workshops or large manufacturing facilities, the JD 72-7520 stands out as a top choice in its category.
Top Page Image Contents