Operating Instructions
Digital displays
The four display fields that are assigned to the four cooking zones dis- play:
– j, after being switched on and when the safety function causes an automatic
– = when a cooking zone is selected,
– ! to ), depending on the selected heat setting,
– a during automatic warm up,
– h when there is residual heat,
– f when there is a fault.
1 Cooking Zone Safety Cut-out
| If one of the cooking zones is not switched off after a certain time or if | ||
| the heat setting is not changed, the corresponding cooking zone | ||
| switches itself off automatically. | ||
| h appears in the ring display for all rings that are switched on, and j | ||
| after they have cooled down. |
| |
| The rings are switched off at: |
| |
| • Heat setting | 1 - 2 | after 6 hours |
| • Heat setting | 3 - 4 | after 5 hours |
| • Heat setting | 5 | after 4 hours |
| • Heat setting | 6 - 9 | after 1.5 hours |
3 | If one or more cooking zones switch off before the times indicated see | ||
| section “What to do if …”. |
|
Cancelling the Safety Cut-out
To cancel the activated safety
cooking zones are again ready for use.
Switching Off for Other Reasons
Liquids that boil over onto the control panel cause all cooking zones to switch off immediately.
If you place a wet cloth on the control panel it has the same effect. In both cases the appliance has to be switched on again using the mains switch nafter removing the liquid or cloth.
10