Electrolux C65030K operating instructions Displaying the remaining cooking time, “egg timer”

	Operating Instructions
3	To set the timer more quickly, leave your finger on the + or - sensor
	field until the required time is reached.

If the - sensor field is operated first, the time setting will begin at

99 minutes; if the + sensor field is operated first, the time setting will begin at 1 minute.

Displaying the remaining cooking time

0If you select a cooking zone which is in timer mode, the cooking time still remaining appears in the timer display window.

	Using the timer to measure short periods of time
	(“egg timer”).
3	The timer function can also be used to measure short times without the
	automatic switch-off function, provided the timer is not already being
	used for 1 or more cooking zones. No cooking zone may be selected in
	this case. The cooking zone sensor field with the decimal point in the
	display must therefore be touched again so that the decimal point goes
	out.
	Set the time as described above.

Ending the timer function prematurely

There are two ways of switching off the timer early:

Switching off the cooking zone and timer simultaneously

0 1. Select the desired cooking zone using the cooking zone buttons.

2.Touch the + and - buttons simultaneously: The cooking zone and timer will switch off.

Switching off the timer - leaving the cooking zone active

0 1. Select the desired cooking zone using the cooking zone buttons.

2.Touch the “Timer” button again

3.Touch the + and - buttons simultaneously:

–Only the timer will switch off.

–The cooking zone will stay on.

19