Electrolux CSIG 503 W manual Using the Gas oven, Oven light push button, Before using your oven

Models: CSIG 503 W

1 27
Download 27 pages 31.97 Kb
Page 9
Image 9
Using the Gas oven

Using the Gas oven

Before using your oven

Switch the oven to MAX. and leave it to run empty for about 30 minutes to remove any unpleasant smell.

During cooking, the door should be opened as little as possible to avoid heat loss, and excessive fuel consumption.

To ignite the oven gas burner:

1.Open the oven door.

2.Hold a flame to the right-hand side hole (see fig.)

3.Press the oven control knob and turn it anti- clockwise until the maximum temperature is reached.

4.Firmly press the oven control knob for approximately 5 seconds, until the safety valve automatically keeps the oven burner lit.

5.Release the control knob and then gently close the oven door. To adjust the temperature, turn the knob to the required setting after a few minutes.

If the oven burner accidentally goes out, turn the oven knob to "" and wait at least 1 minute before trying to light the burner again.

Oven safety device

The cooker features a thermocouple; if for any reason the flame should extinguish, the device will stop the gas flow.

Oven light push button

This button will turn the oven light on.

FO 1079-rev

9

Page 9
Image 9
Electrolux CSIG 503 W manual Using the Gas oven, Oven light push button, Before using your oven, Oven safety device