Electrolux CSIG 503 W manual Oven lamp replacement, Lid cleaning, Oven Shelves

Models: CSIG 503 W

1 27
Download 27 pages 31.97 Kb
Page 15
Image 15
Oven Shelves

Oven Shelves

To clean the oven shelves, soak in warm soapy water and remove stubborn marks with a well wetted soap impregnated pad. Rinse well and dry with a soft cloth.

Oven lamp replacement

Disconnect the appliance.

Unscrew the lamp and substitute it with another suitable for higher temperature (300°C) having the following specifications:

Voltage:

230-240V (50Hz)

Power:15W

Connection: E14

Cleaning around the flame spreader

- Remove the small flap.

-Slide forward the remainder of the lid.

-Lift from the back.

When cleaning around the flame spreader, particles can fall into the drawer below. We recommend placing some paper over the contents of the drawer whilst cleaning.

Please ensure the paper is removed after cleaning or it may ignite, when the oven is next used.

We advise using a stiff dry brush to remove stubborn grease deposits around the base of the unit (see Fig.). Remove any remaining surface fat with a sponge while the oven is still warm.

Place a brush or other suitable cleaning implement into the aperture and brush around the base of the unit with a suitable detergent.

UNDER NO CIRCUMSTANCES SHOULD THE FLAME SPREADER BE REMOVED.

After cleaning, replace the lid correctly.

Lid cleaning

The cooker lid can be disassembled, to allow a better cleaning(see fig.). After a proper cleaning, carefully reposition the lid into its hinges.

FO 0424

FO 0176

FO 0177

FO 0418

15

Page 15
Image 15
Electrolux CSIG 503 W manual Oven lamp replacement, Lid cleaning, Oven Shelves, Cleaning around the flame spreader