Cleaning InstaClean™ Fluid Filter (XR models
only)
The InstaClean Fluid Filter prevents particles from entering paint hose. After each use, remove and clean it to insure peak perfor- mance.
1. Turn power switch OFF.
| WLD | |
2. Disconnect |
| |
airless spray | InstaClean filter | |
hose from | ||
sprayer and | Then, unscrew | |
remove | ||
outlet fitting | ||
InstaClean | First, | |
Fluid Filter. | ||
unscrew hose | ||
| TIA |
3.Check InstaClean Fluid Filter for debris. If needed, clean filter with water and a soft brush.
4.Install InstaClean Fluid Filter.
Install open end of InstaClean filter in outlet fitting, then screw outlet fitting into sprayer outlet.
TIA
outlet fitting
Shutdown and Cleaning
WLD
5.Tighten outlet fitting and reconnect hose to sprayer.
Gun Fluid Filter
Clean gun fluid filter with compatible solvent and a brush every time you flush the system. Replace gun filter when damaged.
3'%&3''3'
FILTER
FILTER | TIA |
309225W | 19 |
