Graco Inc 309225W specifications Technical Data, Height with folded Handle 26 in cm

					Technical Data
Technical Data
		MAGNUM dx	MAGNUM XR5	MAGNUM XR7	MAGNUM XR9
	Working pressure	0-2800 psi (0-19 MPa,	0-3000 psi (0-21 MPa,	0-3000 psi (0-21 MPa,	0-3000 psi (0-21 MPa,
	range	0 -193 bar)	0-207 bar)	0-207 bar)	0-207 bar)
	Electric motor	All 120 Vac: 6.5A	5.8A		9.4A
		Model 247238: 3.5A	(open frame, permanent magnet DC)		(open frame, permanent
		(open frame, universal)			magnet DC)
	Operating	3/8	5/8	3/4	7/8
	horsepower
	Maximum delivery	0.24 gpm (0.91 lpm)	0.27 gpm (1.02 lpm)	0.31 gpm (1.17 lpm)	0.38 gpm (1.44 lpm)
	(with tip)
	Paint hose	3/16 in. x 25 ft	1/4 in. x 25 ft	1/4 in. x 50 ft	1/4 in. x 50 ft
		(4.8 mm x 8 m)	(6.3 mm x 8 m)	(6.3 mm x 15 m)	(6.3 mm x 15 m)
	Maximum tip hole size	0.015 in. (0.38 mm)	0.015 in. (0.38 mm)	0.017 in. (0.43 mm)	0.019 in. (0.48 mm)
	Weight, sprayer only	15 lb (7 kg)	21 lb (10 kg)	31 lb (14 kg)	35 lb (16 kg)
	Weight, sprayer, hose	18 lb (8 kg)	24 lb (11 kg)	36 lb (17 kg)	40 lb (18 kg)
	& gun
	Dimensions: Length	17.5 in. (44.5 cm)	13.75 in. (34.9 cm)	19.5 in. (49.5 cm)	19.5 in. (49.5 cm)
	Width	18 in. (46 cm)	11 in. (27.9 cm)	17.25 in. (43.8 cm)	19 in. (48.3 cm)
	Height	21 in. (53 in.)	19 in. (48.3 cm)	40.75 in. (103.5 cm)	40 in. (101.6 cm)*
				Height with folded	Height with folded
				handle: 26 in. (66 cm)	handle: 26 in. (66 cm)
	Power cord	16 AWG, 3-wire, 6 ft (1.8 m)			16 AWG, 3-wire, 10 ft
					(3.05 m)
	Fluid inlet fitting	3/4 in. internal thread (standard garden hose thread)
	Fluid outlet fitting		1/4 NPSM external thread
	Inlet screen		Early models - 14 mesh (1300 micron)
	(on suction tube)		Later models - 35 mesh (450 micron)
	Wetted parts, pump &	stainless steel, brass,	stainless steel, brass, leather, ultra-high molecular weight polyethylene
	hose	ultra-high molecular	(UHMWPE), carbide, nylon, aluminum, PVC, polypropylene,
		weight polyethylene		fluroelastomer
		(UHMWPE), carbide,
		nylon, aluminum, PVC,
		polypropylene,
		fluroelastomer
	Wetted parts, gun	SG1-EF: plated steel, nylon, aluminum,		SG2/SG3: aluminum, brass, carbide, nylon,
		tungsten carbide, stainless steel, brass,		plated steel, stainless steel, UHMWPE, zinc
		fluroelastomer
	Generator		1500 Watt minimum
	requirement
	Electrical power	All except Model 247328: 120 Vac, 60 Hz, 15A, 1 phase
	requirement		Model 247328: 230 Vac, 50 Hz, 10A, 1 phase
	Storage temperature		-30° to 160°F (-35° to 71°C)
	range ◆❖
	Operating		40° to 115°F (4° to 46°C)
	temperature range ✔

◆When pump is stored with non-freezing fluid. Pump damage will occur if water or latex paint freezes in pump. ❖ Damage to plastic parts may result if impact occurs in low temperature conditions.

✔ Changes in paint viscosity at very low or very high temperatures can affect sprayer performance.

309225W 27