Graco Inc 309225W specifications Installing Tip and Base, Unclogging Spray Tip

Installing Tip and Base

Installing Tip and Base

Unclogging Spray Tip

1. Engage trigger lock.

4RIGGER ,OCKED 0OSITION

3'%& 3' AND 3'

TIA

2.Verify tip and guard parts are assembled in order shown.

retaining nut	black rubber
	gasket
	metal seat

To avoid fluid splashback:

•Never pull gun trigger when arrow-shaped handle is between SPRAY and UNCLOG positions.

•Tip must be pushed all the way into guard.

1.To UNCLOG tip obstruction, point arrow-shaped handle backward to UNCLOG position.

2.Aim gun at piece of scrap or cardboard.

3.Pull trigger to clear clog.

guard

	tip	TIA
Use tip to align seat		Tip must be pushed
in guard.		all the way into guard

7,D

TIA

3.Screw tip and guard assembly on gun. Tighten retaining nut.

TIA

SPRAY position	UNCLOG position
(pull trigger to paint)	(pull trigger to clear
	clogged tip)

Point the arrow-shaped handle on the spray tip attachment forward to SPRAY and backward to UNCLOG obstructions.

TIA

12 309225W