7. Turn power switch ON.
WLD
8. Slowly align arrow on |
|
sprayer with Pail |
|
symbol on Pressure |
|
Control knob until |
|
pump starts. | TIA |
9.Flush until approximately 1/3 of the flushing fluid is emptied from the pail.
10. Turn power switch OFF. | TIA |
| |
Turn |
|
valve to SPRAY. |
|
302!9
11.To preserve paint in hose, trigger gun into paint pail to expel the remaining paint.
12.Turn power switch ON. Continue to trigger gun until you see flushing fluid starting to come out of gun nozzle. Release trigger.
13.Move gun to waste pail and trigger it to flush pump, hose and gun into waste pail. Continue until remaining flushing fluid is gone from flushing fluid pail.
14.Fill unit with Pump Armor™
storage fluid. Read Long Term 
Storage, page 20.
TIA
0UMPM!RMOR
Shutdown and Cleaning
Power Flush
Power flushing is a faster method of flushing. It can only be used after spraying
1. Turn power switch OFF. Lift suction tube and prime tube from paint pail. Let them drain into paint for a while.
WLD
2.Place suction and prime tube in waste pail.
3.Turn
to PRIME.
4.Turn Pressure Control knob to the left
WLD
5.Trigger gun into waste pail to relieve pres- sure in hose.
6.Remove tip and guard assembly from gun and place in flushing fluid.
&,53().' &,5)$
TIA
7.Screw power flush attach- ment to garden hose. Open valve.
8. Turn on water. Rinse paint | OPEN |
| |
off suction tube, prime tube TIA |
|
and inlet screen. |
|
309225W | 17 |
