Electrolux DDO60GA Lighting the appliance, Hotplate, To light, For your safety, D D O 6 0 G A

Models: DDO60GA

1 52
Download 52 pages 48.72 Kb
Page 4
Image 4
Lighting the appliance

Lighting the appliance

D D O 6 0 G A

Lighting the appliance

The system works by means of an electric spark system. Details about the plug are given on page 34.

Hotplate

To light

1.Lift up the lid. You cannot use the hotplate when the lid is down.

2.Push in the control knob and turn it to the large flame symbol (highest setting), and press the ignition button immediately. When the burner has lit release the button.

Warning: If the ignition button is not pressed immediately a build up of gas may cause the flame to spread.

For your safety

If you close the lid of the appliance while any of the hotplate burners are lit the gas will go out. This is because it would be dangerous if the burners stayed on when the lid was closed.

Always use the control knob to turn off a burner. Do not use the lid as a cut-off device. This will only cut off the gas when the lid is closed. The gas will flow again when the lid is opened.

Please note: If you have any trouble lighting a hotplate burner turn all the hotplate control knobs off and make sure the hotplate burner parts have been replaced correctly.

See page 29 for more information.

4

Page 4
Image 4
Electrolux DDO60GA manual Lighting the appliance, Hotplate, To light, For your safety, D D O 6 0 G A