125986421_gb.qxp 2007-09-14 09:11 Page 20
20 electrolux something not working
Something not working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
During machine operation it is possible that the Start/Pause pilot light flashes to indicate that the machine is not working.
Once the problem has been eliminated, press the Start/Pause button to restart the programme. If after all checks, the problem persists, contact your local Service Centre.
Malfunction |
| Possible cause |
| Solution |
|
|
|
|
|
Dryer does not work.
Drying results unsatisfactory.
●Mains plug is not plugged in or fuse is not working correctly.
●Loading door is open.
●Have you pressed the 
button?
●Wrong programme selected.
●Lint filter clogged.
●Incorrect volume of laundry.
●Ventilation slots in base area covered up.
●Residue on inside surface of drum or drum ribs.
●Plug in at mains socket. Check fuse in fuse box (domestic installation).
●Close loading door.
●Press the 
button again.
●Select a different programme the next time you dry (see “Overview of programmes” section).
●Clean lint filter.
●Observe recommended loading volumes.
●Uncover ventilation slots in base area.
●Clean inside surface of drum and drum ribs
Loading door does not |
| ● Fine strainer not in place |
close. |
| and/or large mesh filter not |
|
| locked in place. |
|
|
|
●Install fine strainer and/or snap large mesh filter into place.
