125986421_gb.qxp 2007-09-14 09:11 Page 21
something not working electrolux 21
Malfunction |
| Possible cause |
| Solution |
|
|
|
|
|
When pressing a button, the corresponding button flashes several times.
Drum light does not work
●Washing protection. After the start of the programme, the option can no longer be set.
●Programme selector in OFF position.
●Defective light bulb
●Turn the programme knob to
OFF. Set the programme | GB |
again |
|
●Turn programme selector to any programme
●Replace light bulb (see next section).
Drying cycle ends shortly after programme starts. END light illuminated.
Drying cycle lasts an unusually long time. Note:
After around 5 hours the drying cycle ends automatically (see „Drying cycle complete“)
When a button is pressed, Err appears in the
●Not enough washing loaded or washing loaded is too dry for selected programme.
●Lint filter clogged.
●
button pressed and load volume too big.
●Load volume too big.
●Laundry insufficiently predrained.
●Washing protection. After the start of the programme, the
option can no longer be set.
●Select time programme or higher drying level (e.g. EXTRA DRY instead of STRONG).
●Clean lint filter
●
is only suitable for use with loads of up to 3 kg!
●Reduce load volume.
●Laundry must be adequately
●Turn the programme knob to OFF. Set the programme again.
If you are unable to identify or solve the |
| ||
problem, contact our service centre. |
| ||
Before telephoning, make a note of the | IMPORTANT: if you call out an engineer | ||
model, serial number and purchase date | to a fault listed below, or to repair a fault | ||
of your machine: the Service Centre will | caused by incorrect use or installation, a | ||
require this information. | charge will be made even if the | ||
|
|
| appliance is under guarantee. |
Mod. | .......... |
| |
Prod. No |
| ||
|
| Ser. No |
|
P1206 | Mod |
|
|
| ...........Prod. No. |
| |
|
| Ser. No |
|
