Electrolux EFC 630 manual Clearance Height, K Fitting the Wall Brackets

Clearance Height

The cooker hood is designed to be fitted over a cooking appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the Technical Specifications.

If the output of the appliance below the cooker hood exceeds the maximum outputs quoted, please refer to the cooker manufacturer’s installation instructions.

A minimum clearance height of 650mm (251/2”) is required when installed above a

built-in electric hob, or 700mm (27 1/2”) when installed above a built-in gas hob.

A minimum clearance height of 685mm (27”) is required when installed above a slot-in electric cooker, or 787mm (301/2”) when installed above a slot-in gas cooker.

When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mm. If the height of the wall cabinet is

less than 450mm, a gap of 50mm must be maintained either side of the hob.

This cooker hood must not be installed above a cooking appliance with a high level grill.

KFitting the Wall Brackets

1.Draw a vertical line on the wall from the centre of the cooking appliance up to the ceiling, using a spirit level and marking pen. This is to ensure the correct vertical alignment of the appliance.

2.Mark the centre positions Y for the wall bracket keyhole fixing screws item 1 (lower fixing bracket) at 100mm either side of the vertical line. Ensure that the distance between the lowest point of the hood and the cooking appliance beneath meet the clearance requirements quoted above.

	Hob
A: Built-in Electric Hob:	650mm minimum clearance
B: Built-in Gas hob:	700mm minimum clearance

C: Slot-in Electric Cooker: 685mm minimum clearance

D: Slot-in Gas Cooker: 787mm minimum clearance

* Clearance height as specified above

12