Electrolux EFC 630 Installation Instructions, Electrical Connections, Electrical Requirements

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical Information
DIMENSIONS	HEIGHT CANOPY:	24cm
	HEIGHT CHIMNEY - UPPER SECTION	40cm
	LOWER SECTIN	36cm
	WIDTH CANOPY	60cm
	DEPTH:	49cm
ELECTRICAL SUPPLY:	Voltage (50Hz)	220-240 V
POWER CONSUMPTION:		225W
FAN MOTOR:		145W
LAMP:	2 x 40	80W
SUITABLE FOR INSTALLATION
ABOVE:	ELECTRIC HOB:	7KW (max)
	GAS HOB:	10KW (max)
	SLOT-IN GAS COOKER	13.5KW (max)
	SLOT-IN ELECTRIC COOKER	12.4KW (max)

Note: CE Marking certifies that this appliance complies with the require- ments laid down in EEC directive 89:336. (Electromagnetic compatibility) and subsequent modifications and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

This appliance must be earthed

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualified electrician e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

This appliance is fitted with a 3 core mains cable and must be permanently connected to the electricity supply via a double-pole switch having 3mm minimum contact gap on each pole. A Switched Fuse Connection Unit to BS1363 Part 4, fitted with a 3 Amp fuse, is a recommended mains supply connection accessory to ensure compliance with the Safety Requirements applicable to fixed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC Directive No. 78 308 regarding suppression of radio and television interference.

10