Using the hood, Important to know | Electrolux EFC 939 X, EFC 639 X

Using the hood

The hood has one variable speed motor. For the best performance, we recommend using the low speeds in normal conditions and the high speeds in particular cases of strong odour and vapour con- centration.

We recommend starting up the hood a few minutes before cooking and keeping it running until all the odours have been eliminated.

Important to know

If the hood is run at the same time as a burner or fireplace that depend on ambient air (for example gas, Diesel, coal or wood heaters, water heaters, etc.) be careful, because the hood, when it exhausts the air, removes the ambient air required by the burner or fireplace for combustion.

Not valid if the cooker hood is used in recirculation mode.

				5 MIN
0	1	2	3	0

F C

A B E F C D GH I

A – Motor OFF button

B – ON button and motor speed selection button 1 - 2 - 3 - 1 - 2 - . . . .

E – Speed 1 LED

F – Speed 2 LED and grease filter saturation LED (flashes) C – Speed 3 LED and carbon filter saturation LED (flashes) D – Intensive speed indicator LED

G – Intensive speed ON switch H – OFF lamp button

I – ON lamp button

If the hood fails to operate correctly, briefly disconnect it from the mains power supply for almost 5 sec. by pulling out the plug. Then plug it in again and try once more before contacting the Technical Assistance Service.

Intensive speed button

This speed should be used when the concentration of cooking fumes or odours is particularly strong (for example when frying, cooking fish etc.).

The fast speed will run for about 5 minutes and then return to the speed previously set automati- cally (1, 2 or 3), or switch off if no speed was selected. To turn off the fast speed, before the end of the 5 minutes, press button A or button B.

If the hood will be used for recirculation of air, with carbon filter, the warning signal have to be connected as follows: Press the buttons B and G at the same time for about 3 seconds. The LED marked F lights up. When the LED marked C lights up, the warning signal is connected.

To disconnect the warning signal, press the buttons B and G at the same time for about 3 seconds until the LED marked C goes out.

Control devices for the grease filter and carbon filter

This hood has a device which warns you when to clean the grease filter or replace the carbon filter (in the case of the air recircultion version).

This hood is delivered without a carbon filter. For this reason the warning signal to replace the carbon filter is not connected.

Grease filter saturation led

The LED marked F warns you when the grease filter needs to be cleaned.

This LED flashes to warn you that the grease filters must be cleaned.

Generally, these must be cleaned after 40 hours of use.

Read the maintenance instructions provided for the grease filters.

EFC 939 X, EFC 639 X specifications

Electrolux, a leading brand in home appliances, has earned a reputation for its innovative kitchen solutions, and the EFC 639 X and EFC 939 X are prime examples of their commitment to quality and cutting-edge technology in the realm of range hoods.

The Electrolux EFC 639 X is a sleek, contemporary wall-mounted range hood known for its powerful extraction capabilities. With a maximum airflow of up to 750m³/h, it effectively removes smoke, odors, and grease from the kitchen, ensuring a clean and pleasant cooking environment. This model features an elegant stainless-steel design that seamlessly integrates into modern kitchens. One of its standout characteristics is the three-speed fan control, allowing users to easily adjust the extraction power based on the intensity of cooking.

In addition to its performance, the EFC 639 X includes integrated LED lighting, providing bright and energy-efficient illumination over the cooking surface. This not only enhances visibility while cooking but also adds to the aesthetic appeal of the kitchen. The range hood is equipped with easy-to-clean metal filters, which are washable and dishwasher-safe, ensuring that maintenance is straightforward and effortless.

On the other hand, the Electrolux EFC 939 X boasts similar features but with some enhanced functionalities. This model also presents a modern stainless-steel finish and offers impressive extraction power, reaching up to 800m³/h. Notably, the EFC 939 X includes a sophisticated auto-off feature, which automatically switches off the fan after a preset duration, promoting energy efficiency and convenience.

What sets the EFC 939 X apart is its advanced touch controls, allowing users to operate the hood with just a tap. The device includes a timer function, which is particularly useful for those who may forget to turn off the ventilation after cooking. Like the EFC 639 X, the EFC 939 X features removable and washable filters for easy maintenance, as well as integrated LED lights for optimal visibility.

Both models reflect Electrolux's dedication to enhancing user experience through technology and design. With their powerful extraction features, energy-efficient lighting, and user-friendly controls, the EFC 639 X and EFC 939 X are excellent choices for anyone looking to elevate their kitchen environment while ensuring superior functionality. Whether you prefer the simplicity of the EFC 639 X or the advanced capabilities of the EFC 939 X, Electrolux stands ready to meet your culinary needs with innovation and style.

Electrolux EFC 939 X, EFC 639 X Using the hood, Important to know, Intensive speed button

Models: EFC 939 X EFC 639 X