Electrolux EFC 9440 Installation, Unpacking, Location, Electrical connection not for UK

Installation

Unpacking

Check that the cooker hood has no damages. Transportation damages should immediately be reported to the one responsible for the transport Damages, faults and eventually missing details should immediately be reported to the seller. Take care of the packing material so that small children cannot play with it.

Location

The hood is to be mounted on the wall.
When installed, the hood must be not less than 50
cm. above electric burners or 70 cm. above gas or	Fig. 6
mixed-fuel burners (Fig. 6).
Electrical connection (not for UK)
Safety warnings for the electrician
Before connecting the appliance to the power
supply, check that the voltage indicated on the rating
plate corresponds to the mains power supply
available. Appliances fitted with a plug can be
connected to any standard power socket within easy
access.
Should it be necessary to provide a fixed connection,
the hood must only be installed by an electrician
authorised by the local electricity board. When
installing, an omnipolar disconnector with a distance
of at least 3 mm between contacts must be
provided.
Fixed connection of the appliance must only be
carried out by an authorised electrician.

Electrical connection for UK only

Safety warnings for the electrician		￿￿
Connect the hood to the mains supply via a double
pole switch which has 3 mm minimum separation
between the contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom only:
- the wire which is coloured green and yellow must
be connected to the terminal which is marked
with the letter E or by the earth symbol (	), or
coloured green or green and yellow;
- the wire which is coloured blue must be
connected to the terminal which is marked with
the letter N or coloured black, -
- the wire which is coloured brown must be
connected to the terminal which is marked with
the letter L or coloured red.

Min	Min
	70 cm
50 cm