3.Clean the metal inlet grille/s and motor support/ s before replacing the charcoal filter/s.
4.Place the new charcoal filter/s (B) over the motor support/s (A), and while holding the filter securely insert the disk (C) and turn clockwise.
This appliance can be a fire hazard if the grease and charcoal filters are not replaced as recommended.
Changing the Lamps
If a lamp fails to function check that the lamp is securely screwed into the holder. To tighten the lamps turn clockwise, but ensure not to over tighten them and bre- ak the lens.
When changing the lamps an identical replacement must be fitted to ensure the safe working of the cooker hood. The replacement lamps are specified
Replacement charcoal filters, grease filters and lamps can be obtained from your local Service Force Centre.
7
