Contents

 

Description of the appliance

3

Instruction for the User

3

Cleaning and Maintenance

4

Guarantee - After Sales Service

5

Technical Data

6

Instruction for the Installer

6

Electrical Connection

7

Adaptation to different

 

types of gas

8

Building In

9

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

￿Step by step instructions for an operation Hints and Tips

Environmentalinformation

Description of the appliance

1 2

1 Rapid Burner - 3,0 kW

2 Auxiliary Burner - 1,0 kW

3 Burner Control Knobs

3

Instruction for the User

Burner Control Knobs

The hob burner control knobs are situated on the hob front panel. The symbols on the knobs mean that :

￿there is no gas supply

there is maximum gas supply / Ignition setting there is minimum gas supply

Lighting the burners

For easier lighting, proceed before putting a pan on the pan support.

1. Push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position.

2. After lighting the flame, keep the knob pushed down for about 5 seconds. This will allow the "thermocouple" (Fig. 1 lett. D) to be heated and the safety device to be switched off, otherwise the gas supply would be interrupted.

3.Then, check the flame is regular and adjust it as required.

3

Page 3
Image 3
Electrolux EHGT326X manual Contents, Description of the appliance, Instruction for the User