Electrolux EHS 6651 P Timer

Timer

You can use the timer in two ways:

•as

Switch-off automatic function. You set a

slow cooking time for a cooking zone, and the

cooking zone switches off automatically when

the time expires. This function can be used for

several cooking zones at the same time.

•as a minute minder that does not control the

hob („egg timer”), you hear an acoustic signal

after the set time expires.

The cooking zone(s) for which you want to use the

automatic switch-off function must be switched on.

1. With the Timer sensor field select which

heating zone is to be controlled by the

automatic switch-off function is to be set.

By touching once the Timer sensor field the

first active cooking zone is selected clockwise, the

relevant lamp flashes quickly. Here, for example,

the left rear control lamp corresponds to the left

rear cooking zone. In the timer display, there

appears .

By a repeated touching of the Timer sensor field

the next active cooking zone is selected.

2. While the control lamp is flashing quickly, and

using the Timer setting sensor fields or

for this cooking zone, set the required time

period up to the automatic shut-off (e.g., 15

minutes).

After a few seconds, the automatic switch-off

function is activated.

The control lamp now flashes slower and the

remaining slow cooking time is shown in the

display. If the automatic switch-off function is set

for several cooking zones, then this applies for the

cooking zone with the shortest remaining slow

cooking time. The control lamps of the other

cooking zones with set shut-off automatic function

light up. To indicate the remaining slow cooking

time of one of these cooking zones, this must be

selected with the Timer sensor field , the

corresponding control lamp then flashes quickly.

The minute minder cannot be used when

a cooking zone is switched on.

~ 1 sec.