Carry out a gas tightness test after connect- ing to the gas supply.

The gas bayonet connector must be fitted in the shaded area indicated.

Take into account that it must be possible to pull the appliance forward sufficiently. Ensure the hose does not become trapped when pushing the appliance into position.

IMPORTANT: FLEXIBLE TUBING USED MUST COMPLY WITH BS.669 CURRENT EDITION.

LPG Flexible connections must be a type suitable for

L.P.G and capable of operation up to 50 mbar and carry a red stripe, band or label.

Fitting the stability chain

It is recommended that if the appliance is to be installed with a flexible supply pipe, a sta- bility chain be fitted and is available from your supplier (see Important Safety Require- ments).

These instructions should be read in con- junction with any leaflet packed with the sta- bility chain.

1.Place the appliance in its intended posi- tion and level appliance.

2.Mark a position 100mm from the top of the rear right hand corner.

3.Measure down 150mm from this point. This gives the position of the wall anchor point for the stability chain.

electrolux 23

4.The stability chain anchor point on the appliance is shown in the diagram

Pressure testing

1.The Rapid injector is used as a pressure test point.

2.Connect the pressure gauge to the Rapid injector.

3.Check the supply pressure by turning the Rapid burner on and one other hotplate burner full on and light the appropriate burner. The pressure should be either:- (i) For Natural Gas 20mbar (ii) For LP. Gas. The pressure must be set to 29 mbar for use on butane or 37 mbar for use on pro- pane.

4.Turn off the taps, disconnect the pres- sure gauge.

5.Check operation of each hotplate burner.

Checking the hob

1.Lift the lid.

2.Fit the burner crowns and caps ensuring that they are correctly seated.

3.Fit the pan supports.

4.To light the hob burners push in and hold the control knob, turn to large flame sym- bol (highest setting) and press the ignition button immediately. Keep the control knob depressed for up to 5 seconds, but no longer than 10 seconds. After this time release the controls. The flame should re- main alight.

5.Turn off the hob and wait 1 minute. Turn the hob control knob to large flame sym- bol (highest setting).

6.Do not depress or attempt to ignite the burner. No gas should flow.

Checking the lid shut-off device

1. Lift the lid

Page 22 Page 24
Page 23
Image 23
Electrolux EIKG5547 Fitting the stability chain, Pressure testing, Checking the hob, Checking the lid shut-off device
Page 22 Page 24

EIKG5546, EIKG5547 specifications

Electrolux has a strong reputation in the world of kitchen appliances, and their EIKG5547 and EIKG5546 models exemplify this commitment to quality and innovation. These freestanding cookers are designed for versatile cooking, making them ideal for both amateur cooks and seasoned chefs.

One of the standout features of the EIKG5547 and EIKG5546 is their efficient energy management. Both models come with an A energy rating, ensuring that they not only save on electricity costs but also contribute to a more sustainable environment. Energy efficiency is increasingly important for consumers, and these cookers deliver without compromising performance.

The EIKG5547 is equipped with four gas burners, each featuring a flame failure safety device. This technology ensures that if the flame goes out, the gas supply will be automatically cut off, providing peace of mind. The EIKG5546, while also featuring four burners, offers a different flavor with one powerful wok burner that provides additional heat for those larger pots, making it exceptionally versatile for stir-fry dishes or heavy-duty cooking.

Cooking is simplified in both models with the inclusion of a spacious oven. The EIKG5547 features a 70-liter capacity, while the EIKG5546 offers a slightly smaller option. Both ovens come equipped with a conventional heating system, ensuring even cooking results while making it ideal for baking. The ovens also include an easy-to-clean enamel interior that prevents food residue from sticking, making maintenance a breeze.

In terms of design, both the EIKG5547 and EIKG5546 feature a sleek stainless-steel finish that complements any modern kitchen decor. Their contemporary knobs and controls are intuitively placed for ease of use, allowing for seamless cooking experiences. In addition, the glass oven door provides visibility into the cooking process without needing to open the oven and release heat.

Aside from their impressive features, these cookers are designed with durability in mind. The robust construction and high-quality materials used ensure longevity, making them a wise investment for any household. Whether you're boiling, simmering, baking, or roasting, Electrolux’s EIKG5547 and EIKG5546 cookers stand out as reliable, high-performing options that bring convenience and efficiency to cooking. With a blend of safety, energy efficiency, and modern aesthetics, these appliances perfectly cater to contemporary culinary needs.
Top Page Image Contents