8electrolux
The gas cooktop
Control knobs on the gas hob
The knobs for using the gas hob of the cooker are found on the control panel. The regulation knobs could be turned in
No gas supply
Maximum gas supply
Minimum gas supply
)To light a burner:
Your cooker is provided with automatic integrated ignition:
1.Press the knob corresponding to the burner ring and turn it anticlockwise
to the “Max” symbol ( | ). The oven |
will light automatically. |
|
2.Make sure the flame is even and turn the knob to the required setting.
After lighting the flame, keep the knob pressed for about 5 seconds; this is the time necessary to deactivate the safety valve, which would otherwise stop the delivery of gas. Make sure the flame is even and turn the knob to the required setting.
If the flame fails to light after a few attempts, check that the cap (shown in figure 1 by letter A) and flame spreaders (letter B) are in the correct position.
To turn off the flame, turn the knob clockwise to the 
symbol.
To light the burner rings more easily, ignite them before placing cookware on the grate.
Do not keep the control knob pressedformorethan15seconds. If the burner does not light even after 15 seconds, release the control knob, turn it the “off” position and wait for at least 1 minute before trying to light the burner again.
If the burner flame goes out accidentally, turn the control knob off and do not try to reignite for at least 1 minute.
Always lower the flame or turn it off before removing cookware from the burners.
| A |
| B |
| D |
| C |
A - | Burner Cap |
B - | Flame spreader |
C - | Spark generator |
D - | Thermocouple |
