Vent Pipe Installation (When supplying combustion air from the indoors (SV, non-direct vent))

* Dip switch No.3 is turned on.

t%JTDPOOFDUQPXFSBOEUVSO0/EJQTXJUDIJGDPNCVTUJPOBJSXJMMCF supplied from the indoors as illustrated to the right. Refer to page 29 for the location of the dip switch bank.

t47$POWFSTJPOLJU47$,JTSFRVJSFEGPSUIFBJSJOUBLF.

WARNING

'BJMVSFUPQFSGPSNUIFBCPWFTUFQTDPVMESFTVMUJOBàSFPSFYQMPTJPODBVTJOH property damage, personal injury or death.

3FGFSUPUIFJOTUSVDUJPOTQSPWJEFEXJUIUIFDPOWFSTJPOLJUGPSBEEJUJPOBMEFUBJMT

Horizontal Vent Termination- PVC/CPVC Materials Only

 

3” Min.

 

Hanger

Exhaust

Straps

Intake

 

Slope vent

 

 

Insert Bird

 

Upwards

 

 

 

 

 

 

Screen* in

SV Conversion Kit

 

 

 

 

 

 

 

 

 

 

Each End

Accessory

 

 

 

 

 

of Tee

(#SV-CK-3)

**1' (0.3m) Minimum

 

Inlet screen

 

 

 

 

 

 

 

 

90 Elbow

 

 

 

 

 

 

 

* Not supplied with water

 

 

 

heater, order separately.

 

 

 

**1' (0.3m) Minimum

 

 

 

 

recommended, but not required.

 

Pipe Material

 

 

PVC or CPVC

 

 

Max. Straight Vent Length ***

No. of Elbows

4" (100mm) Pipe

3" (75mm) Pipe

6

24'

(

7.2m)

24'

(

7.2m)

5

30'

(

9.0m)

30'

(

9.0m)

4

35'

(10.8m)

35'

(10.8m)

3

41'

(12.6m)

41'

(12.6m)

2

47'

(14.4m)

47'

(14.4m)

1

53'

(16.2m)

53'

(16.2m)

*** Not including the termination

CA tee, 45 elbow, or the PVT-HL termination may be used for the vent termination. It is not necessary to use bird screens with the PVT-HL termination.

CTerminate at least 12" (300mm) above grade or above snow line.

CTerminate at least 7' (2.1m) above a public walkway,

6' (1.8m) from the combustion air intake of any appliance, and 3' (0.9m) from any other building opening, gas utility meter, service regulator etc.

CTerminate at least 3' (0.9m) above any forced air inlet within 10' (3m) , 4' (1.2m) below, 4' (1.2m) horizontally from or

1' (0.3m) above any door, window, or gravity air inlet into any building per National Fuel Gas Code ANSI Z223.1/NFPA 54.

CSlope the horizontal vent 1/4" upwards for every 12" (300mm) toward the termination.

CUse a condensation drain if necessary.

C In the Commonwealth of Massachusetts a carbon monoxide detector is required for all side wall horizontally vented gas fuel equipment.

Please refer to Technical Bulletin TB 010606 for full installation instructions.

C When installed in a manufactured home, all combustion air must be supplied from the outdoors as shown on pages 15 - 17.

Vertical Vent Termination- PVC/CPVC Materials Only

Storm Collar

Insert Bird

Screen* in

End of 90

Elbow

C Terminate at least 6' (1.8m) from the combustion air intake of any appliance, and 3' (0.9m) from any other building opening, gas utility meter, service regulator etc.

Roof

Flashing

 

 

Firestop/Support

 

Support

 

Exhaust

Hanger

Firestop

Intake

Strap

 

 

 

SV Conversion Kit

 

Accessory

Slope vent

(#SV-CK-3)

Upwards

Inlet screen

**1' (0.3m)

 

 

Minimum

90 Elbow

 

* Not supplied with water heater, order separately.

**1' (0.3m) minimum recommended, but not required.

C Enclose exterior vent systems below the roof line to limit condensation and protect against mechanical failure.

C When the vent penetrates a floor or ceiling and is not running in a fire rated shaft, a firestop and support is required.

C When the vent termination is located not less than 8' (2.4m) from a vertical wall or similar obstruction, terminate above the roof at least 2' (0.6m), but not more than 6' (1.87m), in accordance with the National Fuel Gas Code ANSI Z223.1/NFPA 54.

C Provide vertical support every 3' (0.9m) or as required by the vent pipe manufacturer's instructions.

C A short horizontal section is recommended to prevent debris from falling into the water heater.

C When using a horizontal section, slope the horizontal vent 1/4” upwards for every 12” (300mm) toward the termination to drain condensate.

C When installed in a manufactured home, all combustion air must be supplied from the outdoors as shown on pages 15 - 17.

18

Page 19 Page 21
Page 20
Image 20
Electrolux EN18WI30LS, EP18WI30LS installation manual Dip switch No.3 is turned on, Upwards, Tee
Page 19 Page 21

EN18WI30LS, EP18WI30LS specifications

The Electrolux EP18WI30LS/EN18WI30LS is a modern air conditioner designed to provide efficient cooling and comfort in residential spaces. Known for its performance and innovative features, this model is ideal for urban homes, small offices, and any area requiring temperature control.

One of the standout features of the EP18WI30LS/EN18WI30LS is its impressive energy efficiency. Equipped with a high Seasonal Energy Efficiency Ratio (SEER), it consumes less electricity compared to traditional cooling systems. This not only helps in reducing monthly energy bills but also contributes to a lower carbon footprint, making it an environmentally conscious choice.

The air conditioner boasts a powerful cooling capacity, ensuring that it can quickly lower the temperature in medium to large-sized rooms. With multiple fan speeds, users can easily customize their cooling experience, making the most of its advanced airflow technology. This feature enables the unit to distribute air evenly throughout the room, eliminating hot spots and ensuring consistent comfort.

Noise levels are another important aspect of any air conditioning unit, and the EP18WI30LS/EN18WI30LS excels here as well. Its whisper-quiet operation is perfect for nighttime use or during work hours, allowing occupants to enjoy a peaceful environment without disruption. This is achieved through the incorporation of sound-reduction technology that minimizes operational noise.

In terms of user-friendliness, this model includes a user-friendly digital display and remote control, making it convenient to adjust settings from anywhere in the room. Programmable timers and scheduling options further enhance convenience, allowing users to set the air conditioner to operate during specific times, thereby optimizing energy consumption.

Additional features include a built-in dehumidifier function, which helps to reduce indoor humidity levels, making the environment more comfortable and preventing mold growth. The washable and reusable air filter is another thoughtful inclusion, ensuring that maintenance is simple and cost-effective.

Overall, the Electrolux EP18WI30LS/EN18WI30LS exemplifies a blend of efficiency, comfort, and modern technology, making it an excellent choice for anyone in need of a reliable cooling solution. With its focus on performance and ease of use, it stands out in the competitive air conditioning market.
Top Page Image Contents