Attach front mounting brackets
1. Attach each front bracket to outer- most set of holes with 2 screws.
Front brackets | DRAWER |
from kit. |
Attach rear mounting brackets
• Each rear bracket has tabs marked “A” and “B”.
TAB B
TAB A
•Each pedestal has slots in the rear marked “1”, “2” and “3”.
SLOT 1
SLOT 2
SLOT 3
1.Determine your appliance type (washer or dryer) according to column 1 in table below.
2.Orient rear brackets according to column 2 for your particular model.
3.Attach each bracket with 2 screws through the holes that line up on pedestal.
1 - Appliance | 2 - Rear bracket orientation |
DRYER
• Tab A into
•Slot 1
•Arrow pointing to back
WASHER
• Tab A into
• Slot 1
• Arrow pointing to front
•Each rear bracket also has 2 arrows indicating bracket direction when mounted on the pedestal.
DIRECTION
INDICATOR
ARROWS
3
