Electrolux ER 7656B Using The Appliance, Before Use, To Start the Appliance, Thermostat Control

designed USING THE APPLIANCE

This appliance designed for domestic use only, specifically for the storage of

Thistempraturesbetwenapplianceedible10￿C(50(surroundingfoodis￿F)tuffsand. 32toair￿operateCtemperature)(90￿F)in.ambient

If these temperatures are exceeded i.e., colder or warmer, the appliance will not operate correctly. Should the ambient temperatures be exceeded for long periods, the temperature in the freezer section will rise above -18°C and food spoilage may occur.

Before Use

Remove all securing tapes.

Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or products containing alcohol.

To Start the Appliance

1.Allow the appliance to stand for 2 hours after installation.

2.Plug in the appliance and switch on at the mains supply.

3.Turn the thermostat control to the required setting. A midway setting is usually suitable for normal operation (see thermostat control).

4.Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside.

Thermostat Control

The thermostat control is situated under the flap at the front of the top panel. The thermostat control is marked from min to max.

Min (Cold)

Max (Coldest)

The temperature will be affected by:

Room temperature

How often the door is opened

How much food is stored

Position of the appliance

In determining the correct temperature control setting, all these factors have to be considered and some experimentation may be necessary.

Do not allow children to tamper with the controls or play with the product.

6