Activating/deactivating the acoustic signal | Electrolux ESL 6251

Activating/deactivating the acoustic signal

In addition to the optical display (e.g. indicating the end of the cycle, errors) you can also choose to set an acoustic signal.

1.Press the ON/OFF button.

3If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:

Press function buttons 2 and 3 simultaneously for approx. 2 seconds.

The LED indicators of all the programme but- tons that can be selected will illuminate.

2.Press function buttons 2 and 3 simultaneously and hold them down.

The LED indicators for function buttons 1 to 3 will flash.

3.Press function button 3.

The LED indicator for function button 3 will flash. The multi-display will indicate the current setting:

	0b	Acoustic signal deactivated

	1b	Acoustic signal activated (ex-facto-
	1b	ry setting)
		ry setting)

4.Pressing function button 3 will change the setting.

5.Once the multi-display is indicating the required setting, press the ON/OFF button. The setting is now saved.

12

Image 12

Electrolux ESL 6251 manual Activating/deactivating the acoustic signal

Contents

User information Following symbols are used in the text Dear Customer Contents Safety Prior to using for the first timeChild Safety General Safety Diagram of Appliance Control Panel Function button Refill with dishwasher saltRefill with rinse aid Prior to Using for the First Time Setting the Water SoftenerSetting manually Setting electronically III Only when using the dishwasher for the first time Adding dishwasher Salt Filling Up with Rinse Aid Setting the Amount of Rinse Aid Required Activating/deactivating the acoustic signal Daily use Loading cutlery and dishes Loading cutlery Pots, Pans, Large Plates Cups, Glasses, Coffee Service Adjusting the Height of the Upper Basket Type Raising / Lowering the upper basketMaximum height of dishes Upper basket Lower basket Adding Detergent Using 3in1 detergents Concentrated detergentsDetergent tablets Selecting the dishwashing cycle Cycle Table Programme Sequence Dishwashing Suitable TypeFor Soiling Consumption Values2 Selecting a programme Interrupting or Cancelling a dish- washing cycle Cancelling the wash programmeStarting a dishwashing cy- cle Setting the Delay Timer Switching Off the dish- washerRemoving the Dishes Care and cleaning Cleaning the filters Cleaning the spray arm jets Upper basket spray arm Bottom spray arm What to do if Remedying small malfunc- tionsMalfunction Possible cause Remedy Short warning tone, continu Malfunction Possible cause Remedy If the Dishwashing Results are not Satisfactory Dishes are still dirtyDishes do not dry and are not shin- ing There are dried water drops on the glass- es and dishes Disposal Packaging materialOld appliance Technical data Dishwashers that can be fully integrated Sample loading arrangements Lower basket with cutlery basket Cutlery basket Safety Information for the Installation Installing the Dishwasher Dishwashers that can be fully inte- grated Connecting the dishwasher Connecting to the water supplyConnecting the inlet hose Permitted water pressure Water drainage Anti-flood system Electrical Connection Changing a fuse Connecting systems Standard guarantee conditions European GuaranteeThis guarantee does not cover Exclusions For Customer Service in the Republic of Ireland please con 0870 5 929Customer Care Electrolux plc