Setting electronically:
1.Press the ON/OFF button.
3If the LED indicator of only one programme button is illuminated, this wash programme has been activated. The wash programme must be deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators of all the programme but- tons that can be selected will illuminate.
2.Press function buttons 2 and 3 simultaneously and hold them down.
The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 1.
The LED indicator for function button 1 will flash. The
4.Pressing function button 1 increases the hard- ness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5.When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the control indicator for dishwasher salt.
| Water hardness |
| Setting for | Indicator | Number of | |
|
| water hardness | ||||
|
|
| ||||
|
|
|
|
| on the multi- | acoustic- |
in | in | Range | Manual | Electronic | display | signals1) |
°d 2) | mmol/l 3) |
|
| |||
|
|
|
|
| ||
51 - 70 | 9.0 - 12.5 |
|
| 10 4) | 10L | 10 |
43 - 50 | 7.6 - 8.9 |
|
| 9 | 9L | 9 |
37 - 42 | 6.5 - 7.5 | IV | 1 | 8 | 8L | 8 |
29 - 36 | 5.1 - 6.4 |
|
| 7 | 7L | 7 |
23 - 28 | 4.0 - 5.0 |
|
| 6 | 6L | 6 |
|
| |||||
|
|
|
|
|
|
|
19 - 22 | 3.3 - 3.9 | III |
| 5 | 5L | 5 |
15 - 18 | 2.6 - 3.2 |
| 4* | 4L | 4 | |
|
| |||||
|
|
|
|
|
|
|
11 - 14 | 1.9 - 2.5 | II | 0* | 3 | 3L | 3 |
4 - 10 | 0.7 - 1.8 | I/II |
| 2 | 2L | 2 |
|
|
|
|
|
|
|
below 4 | below 0.7 | I |
| 1 | 1L | 1 |
| no salt required | |||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
1)The water hardness will only be indicated acoustically if the acoustic signal has been activated.
2)(°d) German degree, measure of the hardness of water
3)[mmol/l] millimol per litre, international unit for water hardness
4)On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
8
