Launching a Data Connection

To launch a data connection:

Press > Web. (Your data connection will start and the home page will be displayed.)

Note:

If Net Guard is enabled and displayed (see below), press OK (left softkey) to continue and access the Web.

While connecting, an animation will be displayed on the screen.

If you had a previous data connection, you may not see the animation when you start the session again.

Net Guard

When you first connect to the Web, the Net Guard will be displayed to confirm that you want to connect.This feature helps you avoid accidental connections.You can disable the Net Guard in the future by selecting Always Auto-Connectwhen the Net Guard is displayed.

To change your Net Guard settings:

Press > Settings > Web > Net Guard.

Select On to activate the Net Guard.

Select Off to deactivate the Net Guard.

Note:

When enabled,the Net Guard appears only once as long as you have not turned the phone off and on.

160 Section 3B: Data Services

Page 174
Image 174
Sanyo II manual Launching a Data Connection, To launch a data connection, To change your Net Guard settings