Selecting a Tone Type

This setting allows you to to select the type of key beep tone.

To select a type of key beep tone:

1.Press > Settings > Sounds > Others > Tone Type.

2.Select a tone type and press .

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers when you press the keypad.This feature is available when you are in standby mode.

To turn Key Press Echo on or off:

1.Press > Settings > Sounds > Others > Key Press Echo.

2.Select On or Off.

Adjusting the Phone’s Volume Settings

You can adjust your phone’s volume settings to suit your needs and your environment.

Adjusting the Ringer Volume

To adjust the ringer volume:

1.Press > Settings > Sounds > Volume > Ringer.

2.Using the navigation key, choose a volume level and press Done (left softkey).

You can make the ringer vibrate at any volume level by checking the box next to Always Vibrate.

Tip:

You can adjust the ringer volume in standby mode (or the earpiece

 

volume during a call) by using the side volume key.

 

 

Your Phone’s Settings

Section 2B: Controlling Your Phone’s Settings

45

Page 59
Image 59
Sanyo II manual Selecting a Tone Type, Setting Up Key Press Echo, Adjusting the Phone’s Volume Settings