Alert Notification

Your phone can alert you with an audible tone when you change service areas, once a minute during a voice call, when there are incoming messages or voicemail, or when your network signal is fading.

To set alerts:

1.Press > Settings > Sounds > Alerts.

2.Select Service, Voicemail, Messaging, Minute Beep, or Signal Fade and press .

3.Use your navigation key to select a setting and press .

Silence All

There may be times when you need to silence your phone entirely.The phone’s Silence All option allows you to mute all sounds without turning your phone off.

To activate Silence All:

With the phone open, press the side volume key down repeatedly in standby mode. (The screen will display “Silence All.”)

Tip:

You can also select Vibrate All to set your phone to vibrate only (all

 

sounds will be muted).

 

 

To deactivate Silence All:

With the phone open, press the side volume key up repeatedly to select a volume level.

Your Phone’s Settings

Section 2B: Controlling Your Phone’s Settings

47

Page 61
Image 61
Sanyo II manual Alert Notification, To set alerts, To activate Silence All, To deactivate Silence All