Sanyo II Setting the Self-Timer, Using the Zoom, To activate the self-timer, To use the zoom

Setting the Self-Timer

To activate the self-timer:

1.From camera mode, press Options (right softkey) > Self-Timer.

2.Highlight the length of delay you want the timer to use (10 Seconds or 5 Seconds) and press .

3.Press Start (left softkey) when you are ready to start the timer. ( appears on the upper right portion of the Main LCD during the self-

timer countdown.)

4.Get ready for the picture. (When the timer is down to three seconds, the self-timer icon will turn red and the phone will begin to beep.)

To cancel the self-timer after it has started:

▶Press Cancel (right softkey).

Note:

While the self-timer is active, all keys are disabled except Back, END, and the right softkey (Cancel).

Using the Zoom

This feature allows you to zoom in on an object when you take a picture.You can adjust the zoom from 1 to 12 steps (except when Resolution is set to High).

To use the zoom:

1.From camera mode, press the navigation key right or left, or the side volume key up or down to adjust the zoom. (The gauge bar is displayed.)

2.Press to take the picture.

118 Section 2I: Using the Built-in Camera