Ending a Call

To disconnect a call when you are finished:

Close the phone or press .

Note:

If the setting for Close Flip is not set to “End,” closing the phone will not

 

end the call. (See “Setting the Open/Close Flip Option” on page 62.)

 

 

Changing the Ringer Volume

To change the ringer volume, use the side volume key when the phone is open and in standby mode.

Note:

To change the ringer volume from the main menu, see “Adjusting the

 

Phone’s Volume Settings” on page 45.

 

 

Adjusting Volume During a Conversation

When you need to adjust the receiver volume during a conversation, use the side volume key, or press the navigation key up or down while a call is in progress.

Missed Call Notification

When an incoming call is not answered, the Missed Call log is displayed on your screen.

To call the Missed Call entry from the notification screen:

Press Call (left softkey).

To display a Missed Call entry from standby mode:

1.Press > Missed Alerts.

2.Highlight the entry you wish to view and press .

Phone Basics

Section 2A: Phone Basics

27

Page 41
Image 41
Sanyo II manual Missed Call Notification, Ending a Call, Changing the Ringer Volume, Adjusting Volume During a Conversation