Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded announcement, either one that is prerecorded or one that you record.You can also record the caller’s message into the Voice Memo list.

Activating Screen Call

To start Screen Call when you have incoming calls:

When the phone rings or vibrates, press Options (right softkey) > Screen Call.

To set Auto Screen Call:

1.Press > Tools > Voice Memo > Screen Call > Auto.

2.Select On and press .

3.Set the answer delay by using numeric keys or by pressing the navigation key up or down.

4.Press OK (left softkey). (The icon is displayed on the screen.)

Tip:

While the caller’s message is being recorded, press TALK to answer the

 

call, or press END to stop recording and disconnect the call.

 

 

Selecting an Announcement for Screen Call

To select a Screen Call announcement:

1.Press > Tools > Voice Memo > Screen Call > Announcement.

2.Depending on your preference, select Pre-Recordedor Custom.

Voice Services

Section 2H: Using Your Phone’s Voice Services

111

Page 125
Image 125
Sanyo II manual Setting Up Screen Call, Activating Screen Call, Selecting an Announcement for Screen Call