Sanyo II manual Dialing From the Contacts List, Using Speed Dialing, Press Contacts Find/Add Entry

Dialing From the Contacts List

To dial directly from a Contacts entry:

1.Press > Contacts > Find/Add Entry.

Shortcut:	From the standby mode, press Contacts (right softkey) to display
	the Contacts list.

2.Highlight the entry you want to call and press to dial the entry’s default phone number.

– or –

To dial another number from the entry, highlight the name and press

, and then highlight the number you wish to call and press .

Using Speed Dialing

With this feature, you can dial your favorite entries using one keypress for locations 2–9. (See “Assigning Speed Dial Numbers” on page 92.)

To use speed dial :

▶From standby mode, press and hold the appropriate key for approximately two seconds.The display confirms that the number has been dialed when it shows “Connecting...”.

Note:	Speed dialing may not be available when you are roaming; when you
	are roaming off the home network, you must always dial using 11 digits
	(1 + area code + number).

Phone Basics

Section 2A: Phone Basics 35