Electrolux ESL 66010 user manual Water inlet hose with safety valve

Models: ESL 66010

1 48
Download 48 pages 3.46 Kb
Page 38
Image 38

38 electrolux installation

Water inlet hose with safety valve

After connecting the double-walled water inlet hose, the safety valve is next to the tap. Therefore the water inlet hose is only under pressure while the water is running. If the water inlet hose starts to leak during this operation, the safety valve cuts off the running water.

Please take care when installing the water inlet hose:

The electrical cable for the safety valve is in the double-walled water inlet hose. Do not immerse the water inlet hose or the safety valve in water.

If water inlet hose or the safety valve is damaged, remove the mains plug immediately.

A water inlet hose with safety valve must only be replaced by a specialist or by the Service Force Centre.

Place the water inlet hose in such a way that it is never higher than the bottom edge of the safety valve.

Warning!

Dangerous voltage

Page 38
Image 38
Electrolux ESL 66010 user manual Water inlet hose with safety valve