26electrolux daily use
Cancel a washing programme in progress
●Simultaneously press and hold the two programme buttons positioned
over the word Cancel , until all the programme button lights illuminate. The washing programme has been cancelled.
If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.
●Open the dishwasher door.
●The indicator light of the programme just ended will remain on.
1.Switch off the dishwasher by pressing the On/Off button.
2.Leave the dishwasher door ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.
Cancelling the delay start
To cancel a delay start in progress you have to reset the dishwasher.
Simultaneously press and hold the two programme buttons positioned over the word Cancel , until all the programme button lights will illuminate.
Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again.
End of the washing programme
●The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.
When the washing programme has ended, the optical signal on the floor beneath the dishwasher’s door will turn off.
Unloading the dishwasher
●Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.
●Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.
●Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.
