(7) DISP. button
Selects the display mode for the front display of the SR7500.
(8) OSD button
⁄7MENU button
(when AMP mode is selected)
This button is used to call up the SETUP MAIN MENU of the SR7500.
LCD INDICATORS
Information about currently selected source and direct code names are displayed on the LCD.
INAME indicator
This is displayed when the remote control is in renaming mode.
ENGLISH
When this button is pressed, the current setting are displayed on the TV monitor.
(9) SLEEP (sleep timer) button
This button is used for setting the sleep timer. It can be operated the same way as the button in unit.
(0) THX button
Use this button to select the THX mode.
⁄2MEMO button
This button is used to store settings to memory or program a source.
⁄3CONTROL button
Thses buttons are used when operating the PLAY, STOP, PAUSE, and other commands of a source.
⁄8PREV (Previous) button
This button is used to return to the previous channel on the television or other device.
Note:
•This button is unavailable for SR7500.
⁄9CH (Channel) button
This is used to change channels.
¤0CURSOR buttons
These buttons are used when controlling the cursor of the SR7500, DVD, or other AV equipment.
J
I H
G
F E
LEARN
NAME
MACRO
USE
A
B
PAGE 1 2 3 4 
C
D
JLEARN indicator
This is displayed when the remote control is in learning mode.
Note:
•This button is unavailable for the SR7500.
⁄4SOURCE button
Thses buttons are used to switch the source of your A/V Receiver / amplifer. Each time a source button is pressed, the remote control changes to the source which was pressed.
This remote control can control 12 types of equipment. To change the A/V Receiver / amplifier source, press this button twice within two seconds. The signal is sent when it is pressed the second time.
Note:
•Select the AMP as the source to use this remote controll with the SR7500.
⁄5LIGHT 1 and 2 buttons
Pressing these buttons will light up the LCD and its buttons. This lighting time can be set. If the lighting time is set to 0 seconds, the backlight turns on only while this button is pressed. The operations for LIGHT 1 and 2 are identical.
⁄6CLEAR button
This button is used to erase the memory or program of a source.
¤1LCD
Information about the sources and modes are shown on the LCD.
ASource Name indicator
This displays the name of the selected source, such as DVD, television, or other AV equipment (up to five characters).
BDirect Button Name indicator
This displays up to 20 types of button names for each source. (up to six characters)
CPage indicator
This displays the current page position.
DTransmission indicator
This lights up when the remote control is sending a signal.
EUSE indicator
This is displayed under normal operation.
FBattery Level indicator
This is displayed when the battery level is low.
GTIMER indicator
This is displayed when the macro timer is set.
HMACRO indicator
This is displayed when the remote control is in macro programming mode.
9
