ENGLISH | @0EXIT button |
@1DISPLAY button | |
| This button is used to exit from the SETUP MAIN |
| MENU. |
When this button is pressed, the FL display mode is changed as Surround Mode →
→Display Off → Input Function and the display off indicator (DISP) lights up in condition of DISPLAY OFF.
@2MRAC button / MIC jack
Press to automatically measure speaker characteristics using the included microphone
@3SPEAKER A/B button
Press this button to select speaker systems A and/ or B.
Opening and closing the front panel door
FL DISPLAY AND INDICATER
|
|
|
| s f |
|
|
| h | k ¡0¡1 | ¡3 |
|
|
|
| ||||||||||||||||||
|
|
| a |
| d |
|
|
| g | j |
| l |
|
| ¡2 |
|
|
|
| ¡4 | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DISP |
| MULTI | AUTO | TUNED ST | V – OFF | NIGHT | PEAK | ATT | ANALOG |
| SURROUND | ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| DIGITAL | DIGITAL | ||||||||
|
|
| SLEEP | AUTO SURR |
| DISC 6.1 MTX 6.1 SPKR AB |
| |||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| L | C | R | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| PCM |
| LFE |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SL | S | SR | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
¡8¡7 |
|
|
|
|
|
|
|
|
|
|
| ¡6 |
|
|
|
|
| ¡9 |
|
|
| ¡5 | ||||||||||
a DISP (Display Off) indicator |
|
|
|
| j V |
|
|
|
| |||||||||||||||||||||||
This indicator is illuminated when the SR7500 is in | This indicator is illuminated when the | |||||||||||||||||||||||||||||||
the display off condition. |
|
|
|
| function is active. |
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
¡4SIGNAL FORMAT indicators
2DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some of these indicators will be illuminated to display the specific type of signal in use.
¡5ENCODED CHANNEL STATUS indicators
These indicators display the channels that are encoded with a digital
input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be illuminated.If the digital input signal is 2 channel
If Dolby Digital 5.1ch signal with Surround EX flag or
¡6Main Information Display
This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit’s operation.
When you want to use the controls behind the front panel door, open the door by gently pressing on the lower part of the panel. Keep the door closed when not using these controls.
Notes:
•Be careful not to pinch your fingers between the door and the panel.
sSLEEP timer indicator
This indicator is illuminated when the sleep timer function in the
d
This indicator is illuminated when the
fAUTO SURR (Auto Surround mode)
indicator
This indicator is illuminated to show that the AUTO SURROUND mode is in use.
gTUNER’s indicators
AUTO : This indicator illuminates when the tuner’s Auto mode is in use.
TUNED : This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality.
ST(Stereo) : This indicator illuminates when an FM station is being tuned into stereo condition.
kNIGHT mode indicator
This indicator is illuminated when the SR7500 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.
lSPKR (speaker) AB indicator
Active speaker system will be illuminated by this indicator.
¡0PEAK indicator
This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will illuminate. If this happens, you should press the ATT button on the remote.
¡1ATT (Attenuation) indicator
This indicator is illuminated when the attenuation function is active.
¡2DIGITAL Input Indicator
This indicator lights when a digital input has been selected.
¡7THX indicator
This indicator illuminated when the SR7500 is in the THX mode.
¡8PURE DIRECT indicator
This indicator is illuminated when the SR7500 is in the PURE DIRECT mode.
¡9HDCD indicator (SR8500 only)
When HDCD signal is decoded, this indicator will light up.
h | ¡3ANALOG input indicator | |
(DISC6.1, MTX6.1) | ||
This indicator is illuminated when an analog input | ||
These indicators will illuminate to show the DTS- | ||
source has been selected. | ||
ES decoding mode (Discrete 6.1 or Matrix 6.1). | ||
|
6
