Marantz SR8500, SR7500 manual System, Multi Room Playback Using Multi Speaker Terminals

ENGLISH	MULTI ROOM
	SYSTEM
	The Multi Room system is a function which allows
	you to listen to the same or a different source in a
	room other than the room in which the SR7500 is
	located.
	To use this function, a multi room remote unit and
	remote control signal receiver available from your
	Marantz dealer are necessary.
	The operations possible with the multi room
	function are explained briefly below.
	For details, refer to the instruction manual supplied
	with the multi room remote control unit and receiver.
	When the outputs of the MULTI OUT terminals are
	wired and connected to amplifiers installed in

2. In this time, you can select the input source by turning the input selector knob.

Then, the display indicates “MULTI VOLUME” “MULTI VOL. xx” for approx. 5 seconds.

3. During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the second room.

MULTI ROOM PLAYBACK USING

THE MULTI SPEAKER TERMINALS

The SR7500 allows you to connect another set of speakers and place them in a different room or separated area for listening to music.

Operation to MULTI ROOM SPEAKER without the remote controller.

Notes for Multi Room Speaker

•MULTI ROOM SPEAKER On/ Off is available in main room only.

•MULTI ROOM SPEAKER output terminals can be used when the SURROUND BACK SPEAKER is set NONE in SPEAKER SETUP menu. (See SPEAKER SETUP, page 19)

•“The Surr. Back Speakers are in use” is displayed by pressing the MULTI SPEAKER button when the SURROUND BACK SPEAKER is set except NONE in SPEAKER SETUP menu . (See SPEAKER SETUP, page 19)

•The multi speaker feature cannot be used at the same time as the SPEAKER C feature. When connecting for multi room use, set the SPEAKER C selector switch on the rear panel to OFF.

•The multi speaker system cannot be used in the 7.1 input channel mode.

MU L T I	ROOM
V I D EO	:	V CR 1
A UD I O	: FM 1 0 2 .0 0
S L E E P T I ME R	: 9 0 m i n
MU L T I : O F F	MS P KR : O F F
V O L : V AR I	VO L : V AR I
L E V E L : - 9 0 d B	L E V E L : - 9 0 d B
- - - - MA I N - ROOM S T A T US - - - -
V I D EO : D V D	AUD I O : DV D
MA I N			E X I T

2. Press the VOL + or VOL – button on the multi room remote control to set the desired volume.

3. In multi room mode, the multi room remote control can be used in the multiroom to operate the following functions.

General:

other rooms or MULTI SPEAKER OUT terminals

are wired and connected to L&R speakers in other

room, different sources can be played in rooms

other than the main room in which this unit and the

playback devices are installed.

2.1.

AV SURROUND RECEIVER SR7500

INPUT SELECTOR

VOLUME

DOWN

OPERATION OF THE MULTI ROOM OUTPUTS WITH THE REMOTE CONTROL FROM A SECOND ROOM

Controlling volume level, sleep timer, and muting. Selecting input audio and video source

Tuner:

Selecting band, controlling preset channel up and down, tuning up and down, direct frequency call.

SR7500 has some feature to MULTI ROOM

SYSTEM as source selector, OSD information,

sleep timer, Multi Room Speaker output and

remote control.

ENTER

POWER ON/OFF PHONES

AUX 1 INPUT

DIGITAL S-VIDEO VIDEO L

4

M

D1D1

D2

D3

D4

D5D5

1.

1.

CHVOL

2.

OK

2.

PREV	MUTE
	GUIDE

Notes for the Multi Room System

• The MULTI ROOM OUT (MULTI OUT/MULTI

SPEAKER) has analog outputs.

This does not support digital input signals.

• If the Tuner (FM or AM) is active in the main

room, you can not control any function of the

MULTI ROOM PLAYBACK USING

THE MULTI ROOM OUT TERMINALS

The SR7500 is equipped with audio pre-out

terminals for which the volume is adjustable and

composite video output terminals as the MULTI

ROOM output terminals.

1. Press the MULTI SPEAKER button. The unit enters multi room mode and the display indicates “SELECT SOURCE” and flashes the “MULTI” indicators for approx. 10 seconds.

2. In this time, you can select the input source by tuning the input selector knob.

CH

TUNER CD CD-R

TAPE AUX1 AUX2

LIGHT

1

RC1400

Learning Remote Controller

VOL

MD

AMPAMP

2

1.

MENU		EXIT
TEST	CH.SEL	SURR

tuner.

In this case, You must listen to the same station as

the main room.

A separately sold stereo power amplifier can be
connected to enjoy multi room playback.
Operation to MULTI ROOM OUT without the
remote controller.
	2.	1.
	AV SURROUND RECEIVER SR7500
	INPUT SELECTOR	VOLUME
		DOWN
		ENTER
		AUX 1 INPUT
POWER ON/OFF	PHONES	DIGITALS-VIDEO VIDEO L

1. Press the MULTI button. The unit enters multi room mode and the display indicates “SELECT SOURCE” and flashes the “MULTI” indicator for approx. 10 seconds.

3. Then, the display indicates “MSPKR VOLUME” “MSPKR VOL.–xx” for approx. 5 seconds. During this time, you can set the volume level in the multi room as desired.

This will only set the volume in the multi room.

1. Press MULTI on the multi room remote control from the MULTI ROOM.

(Press the AMP button and press the > button until PAGE4 is displayed. Press the MULTI (D1) button.)

This operations will put the SR7500 into multi room mode and “MULTI” will be illuminated on the display.

MULTI ROOM Video output will show OSD information for the MULTI ROOM setup.

36