Marantz SR8500, SR7500 manual Names and Functions

ENGLISH

!8 AUDIO IN/OUT (CD, TAPE, CD-R, TV, DVD, VCR1, DSS/VCR2)

These are the analog audio inputs and outputs. There are 7 audio inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc.... The

audio inputs and outputs require RCA-type connectors.

!9 DIGITAL INPUT (Dig.1 - 6) / OUTPUT (coaxial, optical)

These are the digital audio inputs and outputs. There are 3 digital inputs with coaxial jacks, 3 with optical jacks.

The inputs accept digital audio signals from a compact disc, LD, DVD, or other digital source component.

For digital output, there is 1 coaxial output and 1 optical output.

The digital outputs can be connected to MD recorders, CD recorders, DAT decks, or other similar components.

@0 DVI-D INPUT / OUTPUT (SR8500 only)

This unit has two DVI-D inputs and one DVI-D output. The input function can be selected from the

SETUP MAIN MENU.

REMOTE CONTROLLER

RC8500SR

NAMES AND FUNCTIONS

z

	POWER	x
OFF	ON

ON/OFF

	SOURCE		c
		M	v
		D1
¤1		D2
		D3	b
		D4

D5

¤0 n

CHVOL

⁄9			OK		m
⁄8					,
		LIP·SYNC
	PREV			MUTE	.
			GUIDE
⁄7	MENU		2	EXIT	⁄0
	1			3
	TEST		CH.SEL	SURR
	7.1CH		ATT	SPK-AB	⁄1
	4		5	6
	DISP		OSD	SLEEP
	7		8	9
⁄6			THX		⁄2
	CLEAR		0	MEMO
					⁄3
	TV	DVD	VCR	DSS
	TUNER	CD	CD-R	MD	⁄4
	TAPE	AUX1	AUX2	AMP	⁄5
			LIGHT
	1			2

RC8500SR

Learning Remote Controller

zInfrared Transmitter and Learning

Sensor

This transmitter emits infrared light. Press the buttons while pointing the transmitter towards the infrared receiver window of the SR7500 or other AV equipment. Be sure to also point towards other remote controls when using the learning function.

xPOWER ON and OFF buttons

(When AMP mode is selected)

These buttons are used to turn the SR7500 on or off.

cSOURCE ON/OFF button

This button is used to turn a specific source (such as a DVD player) on or off independently from the rest of the system.

vM (Mode) button

This button is used to program Macros. Pressing this button switches between Normal mode and Macro mode.

The > button is used to move to the next page. Up to 20 programs (4 pages) can be made. Holding down the M button for three seconds or more switches to the Setup mode, where the Setup menu is shown on the LCD. The Setup menu has four pages, and the > button is used to move to the next page. Pressing the > button from page 4 returns you to page 1.

bD1 to D5 (Direct) buttons

Five types of direct operations can be performed for each of the 12 source buttons such as the DVD, television, amplifier, and other AV equipment. The pages can be switched, so 4 pages ⋅ 5 types = 20 operations can be performed for a single source. The text display can also be changed.

n> (Page) button

This button is used to switch pages for the Direct button. The current page is shown on the LCD.

mVOL (Volume) button

This button is used to adjust the volume for the amplifier and television.

Note:

•Set the AMP mode to use this button with the SR7500.

,MUTE button

This button is used to mute the audio for the SR7500 and television.

Note:

•Set the AMP mode to use this button with the SR7500.

.GUIDE button

This button is used to display the menus for the DVD player, DSS (satellite broadcasting tuner), or other AV equipment.

(when AMP mode is selected)

This button is used to select the LIP.SYNC mode.

⁄0EXIT button

(when AMP mode is selected)

This button is used to cancel settings in the setup menu.

⁄1Numeric buttons

These buttons are used to switch between 0 to 9 of the source components. If the source is set to the amplifier, these buttons are used to perform operations.

(when AMP mode is selected)

(1) TEST button

Used to enter the test tone menu.

(2) CH SEL. (channel select) button

Used to call up SETUP MAIN MENU and adjust speaker levels or 7.1 ch input level.

(3)SURR (surround) button Used to select the surround mode.

(4)7.1CH button

Press this button to select the output of an external multi channel decoder.

(5) ATT button

When the input signal is too high and the voice distorts even by throttling the SR7500 VOLUME control, turn on this function. “ATT” is indicated when this function is activated.

The input level is reduced. Attenuator is invalid for use with the output signal of “REC OUT”.

Note:

•This function is unavailable during the digital input is selected.

(6)SPK-AB button

Speaker mode is switched in the following sequence.

A → B → A+B → off

8