10.Put the plastic caps in the holes. You can find these caps in the user manual bag.
Warning! Remove all the packaging and the transit bolts before you install the appliance.
We recommend that you keep the packaging and the transit bolts for when you move the appliance.
POSITIONING AND LEVELLING
•Install the appliance on a flat hard floor.
•Make sure that carpets do not stop the air circulation below the appliance.
•Make sure that the appliance does not touch the wall or other units
•Loosen or tighten the feet to adjust the level. A correct adjustment of the appli- ance level prevents the vibration, noise and the movement of the appliance when in operation.
electrolux 19
Caution! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level.
THE INLET HOSE
•Connect the hose to the appliance. Loose the ring nut to set it in the correct position.
•Connect the water inlet hose to the cold water tap with 3/4 thread.
x4
x4
• The appliance must be level and stable.
Caution! Make sure that there are no leaks from the couplings.
Do not use an extension hose if the in- let hose is too short. Contact the serv- ice centre for the replacement of the in- let hose.
