Operating sequence

Washing only

Before washing your first load of laundry, we recommend that you run a cotton cycle at 95°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time, shaking them out as much as possible.

Close the door.

P0004

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out the amount of detergent recommended by the manufacturer in a graduated cup and pour it into the main wash compartment .

If you wish to carry out the prewash programme, pour detergent into the appropriate compartment marked .

3. Measure out the additive

If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.

4. Switch the machine on

Turn the selector dial to the the desired position to switch the machine on. To switch the appliance off turn it to “Off”.

Gentle Spin

Off

Whites

 

Spin

 

Coloureds

Drain

 

Cottons Eco

Rinses

 

Cottons Dry

Mini 30

 

Synthetic

Wool

 

Synthetic Eco

Handwash

Delicate

Synthetic Dry

 

 

5.Select the desired programme/temperature

Turn the selector dial to 95° programme. The lights relevant to the phases that form the programme will light up.

The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The “Start/Pause” button light will start flashing.

If the load of laundry to be washed is small, at the beginning of the cycle the display will still indicate the duration relevant to the maximum load. The duration value will be gradually adjusted during the cycle.

Prewash/Wash

Rinses

Spinning

Drain

Drying

C0064

C0065

18

Page 18
Image 18
Electrolux EWW 1292 manual Operating sequence