Electrolux EWW 1292 Spinning starts late or, Laundry is not spun enough, Machine will not dry or

Problem	Possible cause
• Spinning starts late or the	• The electronic unbalance detection device has cut
laundry is not spun enough:	in because the laundry is not evenly distributed in
	the drum. The laundry is redistributed by reverse
	rotation of the drum. This may happen several
	times before the unbalance disappears and normal
	spinning can resume. If, after few minutes, the
	laundry is still not evenly distributed in the drum,
	the machine will spin at a lower speed. If at the
	end of the programme the laundry is not spun
	enough, redistribute the load manually and select
	the spin programme.
• The machine will not dry or the	• The water tap is closed (E10).
laundry is not dry enough	• The drain filter is clogged (E20).
	• The drying time or degree of dryness has not been
	selected.
	• An appropriate drying time or degree of dryness
	has not been chosen.
	• There is too much laundry inside the appliance.
Water is not	The machine makes an unusual
visible in the machine. The machine,
which is the result of modern technology, runs	noise. The machine is fitted with a commutator
in a very economical way with low water	motor which improves machine
consumption. Performance is	performance.
nevertheless excellent.

ENGLISH

P1035UK

If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.

P1034UK

	Mod
	Prod. No
P0042 BD	Ser. No

29