Symmetricom 1000, 1100 manual Ordering and Parts List, Ordering the Cable Management Option

Chapter 2 Engineering and Ordering Procedures

Ordering and Parts List

Ordering and Parts List

Use Table 2-5to identify the available TimeProvider shelf types. The front and rear access main shelf includes a free copy of the TimeCraft craft GUI (990-46770-99) with each system. All IOCs, IMCs, and Input and Output Connector modules are sold separately.

Table 2-5. TimeProvider Shelves

Model	Outputs	Part Number
1000	8 to 32	990-58001-01
Front Access Main Shelf	(1 to 4 Output Connector modules)
1000	33 to 64	990-58002-01
Front Access Expansion Panel	(1 to 4 Output Connector modules)
1100	8 to 32	990-58101-01
Rear Access Main Shelf	(1 to 4 Output Connector modules)
1100	33 to 64	990-58102-01
Rear Access Expansion Panel	(1 to 4 Output Connector modules)

Ordering the Cable Management Option

Symmetricom offers a cable management kit made of ABS plastic to ensure a neat installation. This kit is 1 RU (Rack Unit) high, and includes two cable trays per kit. The part number is 093-55595-11.

Ordering an NTP or SNMP License

To enable the NTP or SNMP option within the TimeProvider system, you must enter a key into the IMC or IMC/TPIU card. This key is unique to each system and is based on the serial number of the IMC or IMC/TPIU card.

To order the NTP option with a new TimeProvider system, or for an already-installed unit, include part number 920-58000-01.

To order the SNMP option with a new TimeProvider system, or for an already-installed unit, include part number 920-58002-01.

For an already-installed system, you must also provide the serial number of the IMC or IMC/TPIU card with the order to generate the required password.

Once the order is received, a certificate will be issued to the user to indicate the password with the associated TL1 command to activate the NTP option.

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 51