Symmetricom 1000, 1100 manual Making Input Connections, Installing the Input Module

Chapter 3 Installing the TimeProvider

Making Connections

Making Input Connections

You connect the input signals to the TimeProvider using one of the Input modules listed in Table 3-2. Connect the Input module to the shelf before you attach cables.

Table 3-2. Input Connector Modules Available for the IOC

Item Number	Description	Alarm Connector	Reference
090-58061-01	BNC Input module	DB-25 (see Table 3-6)	Figure 3-7
090-58061-02	Wire-wrap Input module	Wire-wrap	Figure 3-8
090-58061-03	DB9 Input module	DB-25 (see Table 3-6)	Figure 3-9
090-58061-04	BT43 Input module	DB-25 (see Table 3-6)	Figure 3-10
090-58061-05	Metric (Siemens) 1.0/2.3	DB-25 (see Table 3-6)	Figure 3-11
	Input module
090-58061-06	Metric (Siemens) 1.6/5.6	DB-25 (see Table 3-6)	Figure 3-11
	Input module

Installing the Input Module

Attach the Input module to the shelf and secure it by tightening the screws on each side of the module.

Figure 3-7. BNC Input Module

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 63