Chapter 4 Provisioning the TimeProvider

Provisioning the Outputs

Enabling and Disabling the Outputs

Use the ED-EQPT command to enable or disable the output signal. This command affects the specified group of eight output channels, or sixteen output channels if the Expansion panel is also used; individual channels cannot be enabled or disabled.

ED-EQPT:[<tid>]:<aid>:[<ctag>]::<keyword>=<value>;

This command has a default access level of ADMIN.

<aid>

<keyword>

<value>

Description

Default value

 

 

 

 

 

OUTg

OUTSTATE

ENABLE

Enable the specified

ENABLE

g = A B C D

 

 

output group

 

 

 

 

 

 

 

 

DISABLE

Disable the specified

 

 

 

 

output group

 

 

 

 

 

 

Sample Command

ED-EQPT::OUTA:TS1000::OUTSTATE=DISABLE;

This command disables output group A and turns off all 8 channels, or 16 channels if the Expansion Panel is also used.

Autonomous Message

TP-SSU 03-10-24 11-09-12 A 1189 REPT EVT

“OUTA,EQPT:NA,OUTSTATE,NSA,03-10-24 11-09-12:\"OUTPUT

GROUP STATE HAS CHANGED,DISABLE\””

;

Provisioning the Output Framing Type

Use the ED-SYNC command to provision the output framing type.

CAS and CCS are available for E1 output framing. D4 and ESF are available for T1 output framing.

ED-SYNC:[<tid>]:<aid>:[<ctag>]::<keyword>=<value>;

This command has a default access level of ADMIN.

<aid>

<keyword>

<value>

Description

Default value

 

 

 

 

 

OUTg

FRMTYPE

8K 1.544M 2M

Provisions the output

2M

g = A B C D

 

6.312M CAS CCS

framing

 

 

 

D4 ESF CC JCC

 

 

 

 

JCC4 ISOLATED_1

 

 

 

 

 

 

 

097-58001-02 Revision G – April 2008

TimeProvider User’s Guide 119

Page 119
Image 119
Symmetricom 1000, 1100 manual Enabling and Disabling the Outputs, Provisioning the Output Framing Type, Outstate Enable