Symmetricom 1000, 1100 manual GPS Codes, PRS and INPp Codes

Chapter 6 Maintaining and Troubleshooting the TimeProvider

Troubleshooting the TimeProvider

Table 6-6. Set and Clear Conditions for Alarms (Continued)

Alarm ID	Set Alarm Conditional Description	Clear Alarm Conditional Description
BTBCKUP	BesTime backup reference disqualified	BesTime backup sources qualified
CLKBRDG	Clock entered Bridging mode	Clock exited Bridging mode
CLKFREE	Clock entered Free-run mode	Clock exited Free-run mode
CLKHOLD	Clock entered Holdover mode	Clock exited Holdover mode
CLKWARM	Clock entered Warm-up mode	Clock exited Warm-up mode
SYNTHEOR	Output generator exceeded pull-in	Output generator within pull-in range
	range
	GPS Codes
ANTCOMM	GPS antenna communication fault	GPS antenna comm fault cleared
GPSPOS	GPS antenna position unknown	GPS antenna position known
GPSPWR	GPS power fault	GPS power fault cleared
GPSSYS	GPS system fault	GPS system OK
GPSTRK	GPS is not tracking satellites	GPS is tracking satellites
INPDISQ	GPS input is disqualified	GPS input is enabled
INPLOS	LOS fault	LOS fault cleared
INPFRQ	Frequency threshold exceeded	Frequency within threshold
INPPHASE	Phase error exceeded threshold	Phase error within threshold
EXDSC	Excessive discontinuity fault	Excessive discontinuity cleared
FFOFF	FFOFF exceeded threshold	FFOFF within threshold
MTIE	MTIE exceeded threshold	MTIE within threshold
TPIUSIG	TPIU signal fault	TPIU signal fault cleared
	PRS and INP[p] Codes
INPDISQ	Input disqualified as possible reference	Input qualified as possible reference
INPAIS	AIS fault	AIS fault cleared
INPLOS	LOS fault	LOS fault cleared
INPOOF	OOF fault	OOF fault cleared
INPFRQ	Frequency threshold exceeded	Frequency within threshold
INPPHASE	Phase error exceeded threshold	Phase error within threshold
INPQL	Quality Level (SSM) exceeded	Quality Level (SSM) within threshold
	threshold

097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 175