Network function
Connecting to the network
To enjoy internet services, you need to connect the TV to a router with a high speed connection to the internet. You can also connect the TV to your Home network server through a router or access point. The TV connection to the router can either be wired or wireless.
NOTE
•If you choose a wired connection to the router, you need an ETHERNET cable (commercially available).
•If you do not have a broadband internet connection, consult the store where you purchased your TV or ask your internet service provider or telephone company.
•An Ethernet and wireless connection cannot be used at the same time. Use only one of the connection types.
•A stable connection speed is required to play back streaming content, otherwise you may not be able to watch normally.
Wired installation
Use an ETHERNET cable to connect the ETHERNET terminal on the TV to your broadcast router as shown below. This is recommended when enjoying services which require stable connection speeds, such as streaming media.
E Wired connection overview
PC (home network server)
Router (commercially available)
ETHERNET cable (commercially available)
Network
E How to connect
Router | ETHERNET terminal |
n
LAN
ETHERNET cable (commercially available)
1Switch on the router (commercially available). Refer to the router’s operation manual for switching on.
2Connect the ETHERNET terminal on the TV to the router (commercially available) with an ETHERNET cable (commercially available).
3Go to “HOME” > “Network setup” > “Connection type”.
4Press c/dto select “Wired”, and then press
A.
•The wired connection will be automatically established. To change the settings manually, go to “HOME” > “Network setup” > “IP setup” and follow the
| TV | [Setup....View settting....Network setup] | ||||||
| Connection type |
|
|
|
|
|
| |
| Wireless setup | Setting Ethernet info. | ||||||
| IP setup |
| [Current setup] | |||||
| IP Control setup | IP address | : Auto | |||||
|
|
| Netmask | : Auto | ||||
|
|
| Gateway | : Auto | ||||
|
|
| DNS | : Auto | ||||
|
|
| MAC address : xx xx xx xx xx xx | |||||
|
|
|
|
|
|
|
|
|
|
|
|
| Change |
|
| Initialize |
|
|
|
|
|
|
|
|
|
|
5Select “OK” to confirm.
•If you have failed to connect to the internet in the above operation, an error message will appear. In this case, press #to return to the normal TV screen and check the relevant settings.
42
