Preparation
| 4 Insert and tighten the four screws into the four | |
Attaching the stand unit | ||
holes on the rear of the TV. | ||
|
|
•Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confirm that there are twelve screws (eight long screws and four short screws) supplied with the stand unit.
21Set the supporting post for the stand unit onto the polystyrene foam.
2Attach the stand base to the supporting post.
3Insert and tighten the eight screws into the eight holes on the bottom of the stand base.
•Hold the stand unit securely with one hand, and then tighten the screws.
Short screws
NOTE
Stand base | Long screws | • | To detach the stand unit, perform the steps in reverse order. |
|
| • | A screwdriver is not supplied with this product. |
|
| • | In the installation procedure, be careful not to catch your |
|
|
| fingers between the TV set and the floor. |
TV front
Supporting post
3
Insert the stand into the openings on the bottom the TV (hold the stand so it will not drop from
of the base area).
sure that the stand is firmly inserted into the TV. installation
Soft cushion
7
