Norton Abrasives C3126, C3120, C6120 Control and Gauge locations and function Chart Type Function

Insure that the operator is familiar with the control and gauge locations and functions before proceeding:

Control and Gauge locations and function Chart

Item	Type	Function
Engine Control Module	Control	Starts Engine, LED warning indicators and will
w/Hour Meter		shut the engine down in the event of low oil,
		over temperature, engine over speed.
Depth Lock	Control	Allows operator to cut at a preset depth
Depth Gauge	Control	Indicates cutting depth
Vernier Throttle	Control	Precise Engine speed control. Pull out or twist.
Raise/Lower Switch	Control	Raise or lower blade into work surface. To
		Raise move the switch to the rear of the saw.
		To lower move the switch forward.
Emergency Kill Switch	Control	Kills Engine when activated
Forward/Reverse Lever	Control	Controls direction and speed of machine
Transmission	Control	Engages or Disengage Transmission. NOTE:
Engage/Disengage		Only Engage the Transmission when the
Lever		Forward/Reverse Lever is in the Neutral
		Position. Engaging the Transmission when the
		Forward/Reverse Lever is not in the Neutral
		Position can damage the Transmission
		Jackshaft Gear
Ignition Power Key	Control	Energize Engine/Engine Gauge system and
Switch		Accessory Control System. Turns the machine
		off.
Fuel Cap w/Gauge	Gauge	Shows current fuel level
12-volt Power Point	Control	Auxiliary power source for 12-volt accessories
		such as: Light Kit. Can be used to charge a cell
		phone
Fuse	Control	Left side fuse protects the Accessory systems.
		Right side fuse protects the Engine Control
		System. All fuse are
		AGC Type Fuse 1/4" DIA x 1-1/4" Long, 15A
Optional Water Pump	Control	Controls optional Water Pump. NOTE: All
Switch		machines will have the switch installed at the
		factory. The water pump is a dealer installed
		option.
Blade Saver Switch	Control	Activates the Blade Saver Switch (Water
		Pressure Switch) System. When activated the
		Blade Saver Switch will shut the engine off if
		low water pressure is used.

16