Norton Abrasives C6120, C3120, C3126, C3130, C6136, C6130 C. Controls and Functions, Controls/Gauges

C. Controls and Functions

Prior to attempting to operate the engine, read the information contained in the engine owner's manual. An engine owner’s manual is supplied with every gasoline powered concrete saw.

1.Check Oil: Add oil if low. Refer to the Deutz engine owner's manual for the recommended SAE viscosity grades. Capacity of oil is 6.4 qt (6.1 liters)

2.Check Fuel: Fill if low. Use only Diesel Fuel rated for on Highway use.

Never use a gasoline or an oil and gasoline mixture!

3.Air Cleaner: Never run the engine without the air cleaner! Rapid engine wear will result from contaminants being drawn through the carburetor and into the engine.

4.Controls/Gauges:

		Engine Control	Depth Lock
	Oil	Module w/Hour
12-volt	Pressure	Meter

Power Point	Tachometer
Switch	Depth Gauge
	Volt Meter
Blade Saver	Vernier
Switch
	Throttle
Optional	Raise/Lower
	Switch
Water Pump
Switch

Fuse		Emergency Kill
		Switch (Hidden
		from view by
		Forward/Reverse
12-volt		Lever)
Power Point
Fuel Cap	Ignition Power	Forward/Reverse
		Lever
	Key Switch
w/Gauge

Transmission

Engage/Disengage Lever

Location of Controls and Gauges

15